Ensure that its mechanical properties are not lower than the strength when the door (opening) is not opened. It is mainly composed of lamp holder, internal lamp electrical, pole body and basic parts. The light source adopts NG400 high pressure sodium lamp with a lighting radius of 60 meters.

The torsion error of the single section of the light Wholesale Led road lights suppliers pole shall not be greater than 7°.5 times the diameter of the large end of the plug-in place. Its height: 15-40 meters. The pole body is generally a cylindrical single-body structure, made of rolled steel plate, and a height of 25-40 meters refers to a new type of lighting device composed of a steel column lamp pole and a high-power combined lamp frame of 25 meters or more.jschindo.

The welding quality of the high pole lamp pole should meet the requirements of GB/T12469, and there should be no cracks, slag inclusions, weld bumps, burn-through, arc craters and needle-like pores that affect the strength, and no wrinkles and interruptions.

When splicing light poles, a bushing must be added to the light pole at the splicing place, the length of which is not less than 300mm, and the wall thickness shall not be less than 80% of the wall thickness of the light pole.Which high pole lamp manufacturer is better? The high pole lamp .

The internal lamps of the high pole lamp are mostly composed of floodlights and floodlights.that I want to give you a brief description today generally refers to a new type of lighting device composed of a steel column lamp pole above 15 meters and a high-power combined lamp. The shape of the pole should not be less than 8m. The design of the pole should conform to the GBJ17 steel structure design code

Megosztás a facebookon

However, the installation and construction of courtyard lights are not standardized. Sometimes the cable length is not enough and the joints do not meet the requirements. On the lamp, the load of the courtyard lamp is too large, the cable is overheated, the wire nose is overheated, the insulation is reduced, and the grounding short circuit occurs; on the other hand, the pole design only considers the situation of the pole itself and ignores the space of the cable head

The quality of supporting projects is not too hard Yard light cables are generally laid on the sidewalk. In addition, the advertising industry has developed rapidly in recent years, and the advertising load is also connected to the courtyard accordingly. Poor construction quality Faults caused by construction quality account for a larger proportion. Unreasonable design One aspect is overload operation.

This situation has become more common in recent years. Today, the editor of courtyard lamp manufacturers will show you the common problems in the installation and construction of courtyard lights. First, the aluminum is fired into a liquid, and then the liquid is poured into a mold using a mold, and then the pattern required by the customer is carved on the aluminum rod, and after it is dried, it is galvanized and sprayed. Compared with steel, it has a slightly weaker firmness.

The steel material only needs to be cut into the required plates by a shearing machine, and then formed into a one-time shape by a plate rolling machine, and then the surface is polished smoothly through procedures such as welding and polishing, and then sprayed and galvanized. In terms of shape, cast aluminum courtyard lights may not be the most beautiful and peculiar. The landscape courtyard lights China IK09 led street lights made of steel materials are also very beautiful. If you want to say which is better, you must first judge according to the customer's preferences and feelings. 

Megosztás a facebookon